Welcome to the Xianghuai Website.We are mainly engaged in designing and manufacturing flexographic printing machines.

It is very important that the flexo press is properly stored when not in use. What should you pay attention to when storing the flexo printing machine? Let's take a look at it.

1. After printing, the ink on the surface of the plate should be cleaned as soon as possible and dried thoroughly.

2. Store in a place where there is no sunlight or no UV lamp.

3. The ambient temperature is controlled at 5 degrees Celsius - 35 degrees Celsius

4. Do not stack the plates.

5. Use a cleaning agent that does not swell the resin.

6. The storage room is kept in good ventilation.

Water-based inks and solvent-based inks will dry and solidify after being left for a long time after printing. Once cured, the ink is difficult to dissolve, and wiping and cleaning will cause the plate to be damaged. Therefore, after printing, the plate should be cleaned and dried before the ink is cured, and then stored in a well-ventilated place. Avoid removing the cured ink by using a strong solvent that expands the plate to damage the plate. Appropriate plate-washing time and storage environment can extend the use time of the plate and reduce the cost waste caused by the patch.

Therefore, the flexo press should pay attention to these details in daily storage to ensure its good performance and meet people's needs.